Cleaning inspection checklist: how to inspect a cleaning company's work
Most buildings judge their cleaning company by complaints. That tells you something is wrong after a tenant noticed it. A regular inspection with a score tells you first, and gives you a record when you need to push back.
National Cleaning Group ·
To inspect a cleaning company's work, walk a sample of rooms with an area-by-area checklist, score each item pass or fail, and track the score over time alongside complaints and repeat misses. Two inspections should run in parallel: the contractor's supervisor checking their own crew, and you checking the contractor.
This post gives you the checklist by area, a scoring method, what counts as a fail, how often to inspect, the KPIs to track, and the part most inspection templates get wrong.
Two inspections, two jobs
The contractor's supervisor inspection and the client's walk do different jobs, and you need both.
The supervisor inspection is quality control. A supervisor walks the building on a set schedule, checks the crew's work against the scope, and fixes problems before occupants find them. It should happen often and produce a record you can see.
The client walk is quality assurance. You, or someone on your team, walk with the account manager to confirm the contractor's inspections match what you see. It happens less often but carries more weight, because it is the basis for any conversation about performance.
If the supervisor's scores are always high and your walk keeps finding problems, the inspection process is the problem, not just the cleaning.
Ask what a supervisor's inspection record contains before you sign. A useful record shows:
- Date, time, and the supervisor's name.
- Which rooms were sampled.
- Pass or fail for each line, with a score per area.
- A note and photo for each fail.
- What was done about each fail, and when it was re-checked.
The cleaning inspection checklist by area
List every area in your scope, and under each, the items a crew is responsible for. Keep each line specific enough that two people would score it the same way.
Entrance and lobby
- Entry glass and door hardware free of smudges
- Mats vacuumed, floor free of debris and grit
- Trash and ash urns emptied
- Reception counter and seating dusted
Offices and workstations
- Trash emptied and relined
- Clear desk surfaces dusted, personal items untouched
- Carpet vacuumed, including edges and under desks where clear
- Hard floors free of debris
Conference rooms
- Table and chairs wiped
- Whiteboards cleaned if scoped
- Floors vacuumed or mopped
Restrooms
- Toilets, urinals, and sinks clean, including under rims and behind fixtures
- Mirrors and stainless free of streaks and spots
- Dispensers stocked to par
- Floor clean at the edges and around fixture bases, no odor
- Partitions and walls free of splash marks
Break rooms
- Counters, tables, and sink clean
- Appliance exteriors and microwave clean
- Trash and recycling emptied
- Floor clean, including under tables
Floors and periodic work
- Hard floor finish free of scuffs and buildup at edges
- Carpet traffic lanes not visibly soiled
- Periodic work done on its scheduled date
Touchpoints and high areas
- Door handles, push plates, switches, and elevator buttons wiped
- Vents and high ledges free of visible dust
For more detail on restroom and break room lines, see our guides to commercial restroom cleaning and office break room cleaning. Our office cleaning checklist gives the full nightly, weekly, and monthly task list your inspection should mirror.
How to score it, and what counts as a fail
Score each line pass or fail, then divide passes by lines inspected for a percentage per area. Pass or fail is easier to apply consistently than a 1 to 5 scale, and it makes failures concrete.
A fail is anything the scope says should be done that is not done or is visibly incomplete. Write the standard down so nobody argues over it later:
| Item | Pass | Fail |
|---|---|---|
| Trash | Emptied, relined, no residue in can | Not emptied, or liner not replaced |
| Restroom fixtures | No visible soil, scale, or odor | Soil under rim, scale, splash marks |
| Dispensers | Stocked to par level | Empty or below par |
| Horizontal surfaces | No visible dust on clear surfaces | Dust visible or wipeable with a finger |
| Floors | No debris, no edge buildup | Debris, sticky spots, dirt in corners |
| Glass | No smudges at eye level | Fingerprints or streaks |
| Periodic work | Done on scheduled date | Skipped or late without notice |
Weight areas if some matter more. Many buildings count restrooms and entries double, because that is where tenants and visitors form opinions.
When and how often to inspect
Inspect early in the morning, before occupants arrive, so you are scoring the night crew's work and not the day's use. A restroom checked at 3 p.m. tells you about traffic and porter coverage, not about the night clean.
| Inspection | Who | Common frequency |
|---|---|---|
| Supervisor quality check | Contractor supervisor | Weekly in busy buildings, at least monthly elsewhere |
| Client walk | You and the account manager | Monthly |
| New contract or problem period | Both, together | Weekly for the first months |
| Periodic work check | You or your designee | After each scheduled project |
Sample rooms instead of checking every room. Pick a different set each time, and include rooms the crew would not expect. Always include restrooms.
Keep the inspector consistent where you can. Scores swing when a different person walks each month with a different idea of clean. Take a photo of every fail, with the room name in the note, so the account manager can route it to the right crew and you can show the same spot passing on the next walk.
What most inspection checklists get wrong
Most inspection templates online come from software vendors and are built to fill a form, not to settle a dispute. They miss three things that decide whether inspections actually change the cleaning.
The standard has to be in the contract first. An inspection can only fail what the scope requires. If the contract says "clean restrooms" and nothing about partitions or par levels, a dirty partition is not a contract failure. Write the task list and the target score into the agreement. Our commercial cleaning contract checklist covers the clauses.
Not every flaw is a cleaning failure. Worn-through floor finish, stained ceiling tiles, a broken dispenser, rust on a partition, and carpet that is past its life all look like dirt. They are building conditions. Mark them separately so they go to maintenance or the capital budget instead of inflating the fail count. A cleaning crew can report them, and light repairs can sit on the same contract, but they should not drag down a cleaning score.
Findings need a closed loop. Each fail should get an owner, a fix date, and a re-check. Then watch for repeats. One miss is a bad night. The same miss three walks in a row is a staffing, training, or scope problem that needs a conversation with the account manager, not another note.
Janitorial KPIs to review every month
Five numbers tell you most of what you need to know. Review them monthly with your account manager:
- Inspection score by area, from both supervisor and client walks.
- Complaints per month, by area and by type.
- Time from complaint to fix, especially for urgent requests.
- Repeat findings, the same item failing on consecutive inspections.
- Missed services, skipped nights or periodic work not done on its date.
Watch the trend over three to six months. A single bad month after a holiday or a staffing change matters less than a slow slide.
How we handle inspections
At National Cleaning Group, supervisors inspect each building against its scope, and every client has a dedicated account manager who reviews the results with you. Urgent requests get a fast response. Our janitorial services page covers the nightly scope those inspections check. To see how your current cleaning scores against a written scope, book a free facility assessment or call (202) 968-1190.
Get a Free Facility Assessment
Leave your details. We walk your building and send a written quote.
Frequently asked questions
What should be included in a cleaning inspection checklist?
Every area in your scope, broken into the surfaces and items a crew is responsible for: floors, trash, horizontal surfaces, touchpoints, glass, restroom fixtures, supplies, and break room appliances. Each line gets a pass or fail, plus a note and a photo for failures. Add the date, time, inspector, and the rooms sampled so results compare across months.
How often should cleaning be inspected?
The contractor's supervisor should inspect your building on a regular schedule, often weekly in busy buildings and at least monthly in smaller ones. The client should do its own walk about once a month, ideally with the account manager. Inspect more often during the first months of a new contract or after a run of complaints.
What is a QC checklist in janitorial services?
A quality control checklist is the inspection form used to check cleaning against the scope. It lists each area and task, records pass or fail for each item, and produces a score. Supervisors use it to catch misses before the client does, and clients use it to hold the contractor to the contract.
What are good KPIs for a janitorial contract?
Track the inspection score by area, the number of complaints per month, time from complaint to fix, repeat findings on the same item, and missed services such as skipped nights or periodic work not done on its date. Review them monthly with the account manager. Trends matter more than any single month.
How do you score a cleaning inspection?
Mark each checklist item pass or fail, then divide passes by items inspected for a percentage per area. Weight restrooms and entries more heavily if those drive your complaints. Agree on the target score and what happens below it in the contract, so the number has consequences and not just a chart.
